Announcement

Collapse
No announcement yet.

Absolutely Driving Me Nuts YAESU FTdx3000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Absolutely Driving Me Nuts YAESU FTdx3000

    I have owned HRD software for several months, I recently purchased the rig in my Subject Line when my ICOM went belly up. I have tried about every cable I own (last one was just a printer cable) and can never seem to get my rig to connect to the radio. I am desperate....not quite suicidal though...to get this sorted out and would be eternally grateful (I'm 72 so at least grateful for a few more years). This is no beef against HRD because I know they are great just one old Ham's dilemma. Thanks....de John KE5JWC in Las Cruces, NM. And PS don't look at my QRZ Page or you might think I am pretty techy....not so much!

  • #2
    John
    I copied this from another website. HTH
    "Do you have RTS enabled in the menu (#40) of the 3000? If so you need to check the RTS box in the HRD connect window. It isn't necessary to be on. I run mine with #40 disabled and it works just fine."

    73 John
    Icom ic-7610, SPE 1.3K-FA amp, Hex beam at 12m, Butternut HF6V for 80m-30m, 40m/80m trap dipole @ 40'.
    PC - Windows 10.
    Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,

    Comment

    Working...
    X