Announcement

Collapse
No announcement yet.

Using DM 780 with SSTV

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using DM 780 with SSTV

    OK i have the program up and can hear SSTV signals on 14.230MHz, but nothing is displaying in Receive window. The Receive tab that lists all SSTV modes is set to None. If I change it to another mode it just flips back to None. Does the program AUTO select the correct mode? What are the magic settings to get it to work?

  • #2
    When "None" is selected it will move to the incoming signal mode. Do you see the green bar rise next to your waterfall when receiving? When transmitting select the mode you want first. I also check the box "Same as RX". I transmit SSTV with DM-780 but I also downloaded a copy of MMSSTV 1.13 and put that on my second monitor, it receive a much clearer picture. Not sure why HRD can not decode like Ver 1,13.

    Comment


    • #3
      Thanks. I have the Icom 7610, do I set the mode to USB on all frequencies (80-10), and do I set the radio mode to just side band or sideband+digital?

      Comment


      • #4
        Yes, USB, I use Kenwood so not sure about the last part.

        Comment


        • #5
          I've not been on digital a long time but use USB-data on my Icom7300 and works well.

          73,

          Jim

          Comment

          Working...
          X