Announcement

Collapse
No announcement yet.

Mark Channels Read ???

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mark Channels Read ???

    Good evening everyone,

    Can not mark forums as read, they are all unread it's strange. do you have the same worries?

    73's de F5SRH

    - Sortie Ham Radio Deluxe 6.0.5.199
    - Yaesu FT1000D, Yaesu FT 736, Yaesu FT 847, Antenne Mosley Pro 67B, Cushcraft R 7000 +
    - Windows 10-64 bits. Processeur Intel Core I5 ​​9600k 3,7GHz 6 coeurs, 8 Go de RAM DDR4-2400Mhz,

  • #2
    Originally posted by F5SRH View Post
    Good evening everyone,

    Can not mark forums as read, they are all unread it's strange. do you have the same worries?

    73's de F5SRH
    I also can not mark forms as read now. Think it started today.
    Bill - KE5YA
    http://ke5ya.hamtx.com

    Comment


    • #3
      Thank you I see that I am not alone, yes today it is certain yesterday there was not this problem. bye bye 73's
      - Sortie Ham Radio Deluxe 6.0.5.199
      - Yaesu FT1000D, Yaesu FT 736, Yaesu FT 847, Antenne Mosley Pro 67B, Cushcraft R 7000 +
      - Windows 10-64 bits. Processeur Intel Core I5 ​​9600k 3,7GHz 6 coeurs, 8 Go de RAM DDR4-2400Mhz,

      Comment


      • #4
        Hi
        it's the same with me. Unfortunately, the forums can no longer be marked as read. Could it be that it is so since an update from windows?
        Hope for a speedy solution.
        Rig:Computer i7 3.2 GHz Ram: 8 GB SSD Samsung SSD 256 GBOS: Win 10 Computer 2. Asus 26 GHz Ram 4 GB Intel ssd 120 GbOS: Win10..Yaesu ft950/Ft100d Linear HLA 300 -400Watt..Antennas: Dj2 UT 7 el 7 Band Yagi W3dzz 2000/GP / Lonwire 160mInterface : Rigexpert plus/Rigepert tiny/Signallink

        Comment


        • #5
          Hello,

          No I do not think it's because of an update of Windows because I'm on other forums or I do not have this problem, it seems related to the HRD forum.
          - Sortie Ham Radio Deluxe 6.0.5.199
          - Yaesu FT1000D, Yaesu FT 736, Yaesu FT 847, Antenne Mosley Pro 67B, Cushcraft R 7000 +
          - Windows 10-64 bits. Processeur Intel Core I5 ​​9600k 3,7GHz 6 coeurs, 8 Go de RAM DDR4-2400Mhz,

          Comment


          • #6
            Same here. It started with just a couple of topics that could not be marked read late last week and buy Sunday, none could be marked as read. This happens on all of my machines, some of which have not had an update during this time so it's most likely a forum server / software problem. The "mark" link at the top of the page has never worked for me, but the bottom one did. A real PITA, if you ask me.

            After entering this comment, I went back to the main page and I could mark THIS link as read. Lets see if it goes back to unread now that I've added something.

            It stayed grayed out (read).

            Now it's unread again.
            Last edited by WB5JJJ; 04-17-19, 19:09.
            --------------------------

            Windows 7 Pro (64bit) on a Dell 755 Duo with 4Gb RAM and 120Gb Kingston SSD
            2 - Dell 1708FB Digital HD Monitors (Rig Control on left and Logbook on right)
            Current version of HRD unless I see problems with it.

            ICOM IC-7410 to HRD via USB (on AS 6-Pack)
            ICOM IC-7000 to HRD via USB (currently mobile)
            ICOM IC-718 to HRD via Serial (on AS 6-Pack)
            ICOM IC-745 poor guy doesn't know what USB, HRD or CAT commands are (on a center-feed wire via LDG AT-11)

            Diamond X-50 at 35' for 2m & 70cm
            Mosley TA54-XLN-6 (7 elements) @ 30' for 20m thru 6m (WARC included)
            M2 6m5-HP @ 35' for 6m (+2 S-Units over Mosley and lower noise levels)
            Inverted "V" @ 30' for 40m & 20m
            Center-Feed Longwire for everything else
            Little Tarheel II Screwdriver for 80m thru 6m mobile using West Mountain TARGETuner

            LDG Electronics AT-11 Automatic Tuner (for IC-718)
            MFJ Electronics MFJ-901B Manual Tuner (for IC-745)

            Array Solutions 6-Pack Antenna switch (2 radio inputs & 6 antenna inputs)

            Yaseu D800SA Rotor controlled by HRD via an Easy Rotor Control (ERC) adapter card

            I upload to eQSL & HRDNet automatically in HRD. LoTW, ClubLog, QRZ.com DAILY and send my cards to the Bureau MONTHLY.
            Why doesn't everybody do this? It's so much easier than having to work through hundreds (or thousands) of log entries once or twice a YEAR.


            Licensed in April 1973.
            Retired July 2011.

            Comment

            Working...
            X