No announcement yet.

Clublog Username and Password wiped

  • Filter
  • Time
  • Show
Clear All
new posts

  • Clublog Username and Password wiped

    For anyone using HRD to upload to Clublog, it appears that a recent, possibly the most recent, HRD update has wiped the user-name and password from the Clublog config page. Unfortunately this isn't apparent when using the auto-send or when manually updating Clublog - there's no dialogue to indicate an issue.
    I've spent the last day chasing my tail trying to identify why HRD wouldn't change the status of a recently LoTW matched contact from 'worked' to 'verified' in Clublog.

  • #2
    This was corrected in the last couple of updates. OK in current .207. Also other passwords were deleted as well.

    Windows 7 Pro (64bit) on a Dell 755 Duo with 4Gb RAM and 120Gb Kingston SSD
    2 - Dell 1708FB Digital HD Monitors (Rig Control on left and Logbook on right)
    Current version of HRD unless I see problems with it.

    ICOM IC-7410 to HRD via USB (on AS 6-Pack)
    ICOM IC-7000 to HRD via USB (currently mobile)
    ICOM IC-718 to HRD via Serial (on AS 6-Pack)
    ICOM IC-745 poor guy doesn't know what USB, HRD or CAT commands are (on a center-feed wire via LDG AT-11)

    Diamond X-50 at 35' for 2m & 70cm
    Mosley TA54-XLN-6 (7 elements) @ 30' for 20m thru 6m (WARC included)
    M2 6m5-HP @ 35' for 6m (+2 S-Units over Mosley and lower noise levels)
    Inverted "V" @ 30' for 40m & 20m
    Center-Feed Longwire for everything else
    Little Tarheel II Screwdriver for 80m thru 6m mobile using West Mountain TARGETuner

    LDG Electronics AT-11 Automatic Tuner (for IC-718)
    MFJ Electronics MFJ-901B Manual Tuner (for IC-745)

    Array Solutions 6-Pack Antenna switch (2 radio inputs & 6 antenna inputs)

    Yaseu D800SA Rotor controlled by HRD via an Easy Rotor Control (ERC) adapter card

    I upload to eQSL & HRDNet automatically in HRD. LoTW, ClubLog, DAILY and send my cards to the Bureau MONTHLY.
    Why doesn't everybody do this? It's so much easier than having to work through hundreds (or thousands) of log entries once or twice a YEAR.

    Licensed in April 1973.
    Retired July 2011.


    • #3
      I impression I have is that, in my case it's the latest version which has caused this best I can tell uploads have continued to work until very recently.
      Regardless, I'll check the status of user-names and passwords for other logging systems as well ...thanks for that info.