Announcement

Collapse
No announcement yet.

QSL label print on Ver 207

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stuart OUD
    replied
    Hi George,
    I'll give it a try, the worst that will happen will it won't work. I'll do as you suggest and load .199 onto another computer and print from there while the old server is active.

    73, Stuart.

    Leave a comment:


  • WB5JJJ
    replied
    I have not had to roll back to 199 since I installed v6.6.0.236 on a different computer than the one I use for my logging and operating. I do this to check each version before I commit to installing it on my main computer, which is still at 199.

    However, before v6.6, it was not a problem at all and I found my previous label formats were still available in the label printer function. But with the new activation server system, I think you will only have 90 days to "roll back" before they take the old server off line. Not sure how this will work with any existing label formats you may have previously created, but I would sure try it until the fix the label printer function to where it is more user friendly.

    George

    Leave a comment:


  • Stuart OUD
    replied
    I may have to roll back to v6.5.199 as I have lots of QSL labels to print. Is there any problems doing that from v6.6?

    Stuart.

    Leave a comment:


  • WB5JJJ
    replied
    The latest version v6.6.0.236 has support for the Dymo labelers. However, the font is very small, and you can't change it either. I'm still using v.199 which has a great looking label setting. Still holding out hope that they will work with the fonts and such to create something that doesn't need a magnifying glass.

    Leave a comment:


  • Stuart OUD
    replied
    Does anyone have any news on when the label printing is to be sorted out? Being relatively rare DX, the amount of cards to be sent is growing well.

    Stuart, GD0OUD.

    Leave a comment:


  • PC1Y
    replied
    Originally posted by W6HDG View Post

    Peter, you are absolutely correct. I wrote to Mike WA9PIE and asked him to rollback the label code to v204 or earlier. I just beta tested 6.6 and my Brother QL570 can not print a label. His answer was, "We're going to fix it after we get 6.6 rolled out". I can't say that I agree with this.

    Howard W6HDG
    Thanks Howard.... so we know now how Mike and HRD listen (not) to his users.
    For me it means no labelprinting for a while....maybe look for an other logprogram
    Peter PC1Y

    Leave a comment:


  • W6HDG
    replied
    Originally posted by PC1Y View Post
    HRD version 6.6 is coming soon I read. I hope in this version de labelprint works with Brother QL-570 and 700 printers. As there is no way back.... after 6.5.207 if had go back to 6.5.199 because of this mailfunction
    73 Peter PC1Y
    Peter, you are absolutely correct. I wrote to Mike WA9PIE and asked him to rollback the label code to v204 or earlier. I just beta tested 6.6 and my Brother QL570 can not print a label. His answer was, "We're going to fix it after we get 6.6 rolled out". I can't say that I agree with this.

    Howard W6HDG
    Last edited by W6HDG; 05-08-19, 15:36.

    Leave a comment:


  • PC1Y
    replied
    HRD version 6.6 is coming soon I read. I hope in this version de labelprint works with Brother QL-570 and 700 printers. As there is no way back.... after 6.5.207 if had go back to 6.5.199 because of this mailfunction
    73 Peter PC1Y

    Leave a comment:


  • WB5JJJ
    replied
    Now that the ARRL has rescinded their exorbitant Outgoing QSL Bureau fees, I am again printing out many QSL labels. Luckily, I keep all previous versions of HRD, even back to the Simon days. So I simply rolled back to .199 and printing was restored and even the previous settings were retained. All is good since I didn't see the need in my case, for any of the fixes in .207, so I have lost nothing by going back. I also use the Dymo 450 Twin as well.

    Leave a comment:


  • K9JDP
    replied
    Like others Lable printing in HRD sucks, I use Dymo 450 twin and two sizes of labels but now nothing works ! need Font Size change capablility and ability to load facorty size labels such as Dymo 30324 & 30336 which I use.this should not be that hard !.

    Leave a comment:


  • ZL2AIM
    replied
    On prior versions of HRD the Brother QL 700 printer had a work around that worked. Vs 6.5.0.207 does not work with this very popular label printer. Hopefully an update soon!

    Leave a comment:


  • PC1Y
    replied
    Is HRD working on a solution...? has someone make a ticket?
    Very quiet on this front

    Leave a comment:


  • F5SRH
    replied
    Hello everyone,

    For me it's very simple, when I select Print labels the program Logbook closes and I have to relaunch HRD. where is the print module I will delete it manually and then reinstall HRD I may be able to see what you have even if only the first phase.

    Why make this part of label printing unusable before a final version! for me the older versions worked very well.

    F5SRH

    Leave a comment:


  • Stuart OUD
    replied
    I too have found the QSL label printing has gone up the spout. None of the predefined templates work, and when I use the create new tab, the programme insists on ignoring the A4 selection and saves as letter.

    Also, If I have had two QSO's with a statiion, the programme just duplicates the first QSO.

    I hope there will be a quick fix for this, as I have a pile of cards for the bureau and hand writing cards is not an option for me.

    Stuart, GD0OUD.

    Leave a comment:


  • IZ4OSH
    replied
    Here you can no longer print a label, preview is not seen, does not show me what I'm printing after there was a block during a print, then the label that was printing was not the one selected.
    I return to print with HRD LABEL until this problem is resolved. 73 Ale

    Leave a comment:

Working...
X