Announcement

Collapse
No announcement yet.

WSJT-X and IC-7610 -- Radio switches to USB setting on receive

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WSJT-X and IC-7610 -- Radio switches to USB setting on receive

    I have WSJT-X set up to use HRD as the rig (using HRD rig control, Network server blank), and the 7610 transmits fine using USB-D1 (or 2 or 3, tested them all). However, when the radio goes back to receive, the 7610 switches to USB; it's no longer in one of the data modes. I can manually change it, either on the radio or in the HRD radio control window, but as soon as I get out of transmit, it switches back to USB. Filtering is set up for SSB vs the data mode.

    Anyone have a solution?

    73

    Lou, W0FK
    W0FK, St. Louis, MO

  • #2
    SIde note:

    If I close HRD rig control, leave the logbook open, and set WSJT-X to use the IC-7610 as the rig (with the main COM port), the radio stays in one of the USB data modes (USB-D1/2/3).
    W0FK, St. Louis, MO

    Comment


    • #3
      I have found that on the radio tab in WSJTX you need to set mode to none. Then it won't switch modes on you.

      Comment


      • #4
        Excellent! That works! I appreciate the tip.

        73

        Lou, W0FK
        W0FK, St. Louis, MO

        Comment

        Working...
        X