Announcement

Collapse
No announcement yet.

No Waterfall using PSK31

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WA4MIT
    replied
    Davy are you trying to copy PSK31?. The setup of DM is the same for super sweeper and regular waterfall use. In DM select program options, waterfall and there is a gain control try increasing this and make sure the two boxes above the gain control and checked. Your problem possibly could be to little signal from your sound card. The water fall display should be pretty bright not dark. Dark indicates to little signal. Also you might want to check where your squelch is set but it is almost impossible to shut off a strong signal with the squelch maye weak ones but not strong ones.
    73 Morris WA4MIT

    Leave a comment:


  • Davy B
    replied
    How did you fix it. I receive messages on the super sweeper but nothing on the waterfall.

    Leave a comment:


  • n6gr
    started a topic No Waterfall using PSK31

    No Waterfall using PSK31

    My waterfall is black. No noise or signals I can hear. I can transmit ok.

    What do you all think?

    Brad
    N6GR
    Last edited by n6gr; 12-29-18, 22:23.
Working...
X