Announcement

Collapse
No announcement yet.

Verion 907 unable to connect IC7300

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Verion 907 unable to connect IC7300

    I have HRD version 907 installed and the Sil Labs 1.3 driver to give me COM4 on the PC, all done and works with MRP40 and CW=Type etc all with no problem into the 7300 using the USB port on rig and PC. The issue is the I cannot get HRD or DM780 to connect, all I get is "Unable to read Frequency", any help appreciated...…
    PC is Windows 10, and IC7300 firmware version1.3

  • #2
    You should have 2 comports set up with the driver. My 7610 sets up 3 and 4 on my pooter and I use 3 for rig control. It set up on HRD as 115.2 kbaud and a ci-v address. So check for correct port and settings.

    Comment


    • #3
      Thanks for the info, got it sorted now..

      Comment

      Working...
      X