Announcement

Collapse
No announcement yet.

Using filter

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using filter

    I want to know how many countries I have on FT8 or any other mode? How I can use the filter to get this information?
    73
    Eloy
    CU3AK

  • #2
    Click on Filter / Select Field / Mode / Contains / Value = FT8
    Regards,

    David G4NVB

    Comment


    • #3
      You could use the Award Tracker.
      Icom ic-7610, SPE 1K-FA amp,Hex beam, Butternut HF6V and homebrew 40m/80m trap dipole.
      PC - Windows 10.
      Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,

      Comment


      • #4
        Bottom line : I don't think you can in HRD .....

        First suggestion, as far as I can see, gives you all FT8 contacts (not just FT8 countries) ... HRD doesn't track DXCC Awards in the "Filter"

        Second suggestion (Awards) gives countries worked on ARRL DXCC 'Digital' modes, not just FT8 or any other digital mode individually (Perhaps you can configure your own Award catagory ... if so How?) ( If you only have FT8 digital contacts in your log, then that will work) ....

        The closest I know of are the tools in JTAlertX ... Which will show exactly the number of New Countries worked on FT8 or JT9 or JT65 or 'Any mode' or 'Any digital mode' .... and give you real time alarms when a needed entity shows up .. Once JTAlertX scans your log, many things are now possible ...
        Ron, W3RJW

        HRD v6.5.0.207
        Acer Aspire XC600, Intel Pentium Dual Core 2.9GHz, 8 GB Memory, 64-bit OS, Windows 8.1,
        Access Data Base
        FTdx-5000+Timewave Navigator Interface/FTdx-3000+SignaLink USB Interface, .. WSJT-X v2.0.1, JTAlertX v2.13.2, HRD v6.5.0.207

        Comment


        • #5
          To add FT8 to the Awards definitions.
          Open Award Tracking.
          Click 'Definitions'
          Double click on ARRL DXCC Digital.
          Award 2 Definition opens
          Double click on Label/Digital
          At the bottom click into the Label 2 box and type Digital -FT8
          Put FT8 in the Value 1 box under Digital FT8.
          Click OK/OK/OK
          If you select ARRL DXCC Digital your FT8 QSO Entities will be listed separately with Worked, Confirmed etc.

          HTH
          John
          Icom ic-7610, SPE 1K-FA amp,Hex beam, Butternut HF6V and homebrew 40m/80m trap dipole.
          PC - Windows 10.
          Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,

          Comment


          • #6
            Hi John,

            TNX for you post. Just todau I was able to check it. I can´t see the ARRL DXCC Digital as you mention on your post. Pse see my pic, I picked the first lable on the top ARRL DXCC (HRD), but no luck with it. Look foward to your help. TNX

            73
            Eloy
            CU3AK
            Attached Files

            Comment


            • #7
              Try this Eloy
              Award Tracking open. Click on Definitions and then on Add.
              Create a Definition as I have done here.

              digital.JPG This works for me
              FT8.JPG

              HTH John
              Icom ic-7610, SPE 1K-FA amp,Hex beam, Butternut HF6V and homebrew 40m/80m trap dipole.
              PC - Windows 10.
              Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,

              Comment


              • #8
                Hi John,

                Tnx once more for the info. I'm trying hard to do this but no luck.
                1 - I try to edit the ARRL DXCC (HRD) changing the data for the FT8, no luck
                2 - I hit the "add" and on the 2 screen after the changes you refer in your post the OK box is not enable. So all stops here.

                Can you use Teamviewer to help me ?

                73
                Eloy
                CU3AK

                Comment


                • #9
                  Originally posted by CU3AK View Post
                  Hi John,

                  Tnx once more for the info. I'm trying hard to do this but no luck.
                  1 - I try to edit the ARRL DXCC (HRD) changing the data for the FT8, no luck
                  2 - I hit the "add" and on the 2 screen after the changes you refer in your post the OK box is not enable. So all stops here.

                  Can you use Teamviewer to help me ?

                  73
                  Eloy
                  CU3AK
                  You need to uncheck the Locked box.image_11707.jpg
                  73, Charlie, K0LAF
                  Last edited by k0laf; 01-23-19, 01:02.
                  73,
                  Charlie, KØLAF

                  Comment


                  • #10

                    Hi all,

                    After a few hours, I manage to get this done. Follow the steps and you can customize the award tracking.

                    1 - Cursor on top of ARRL DXCC (HRD)

                    2 - Hit Copy button (add on the list last row ARRL DXCC)

                    3 - Double click on ARRL DXCC (open Award 2 Definition window)

                    4 - Change Title to Digital FT8

                    5 - Double click on Digital in Label window

                    6 - Erase Label and Value 1:

                    7 - Type on Label: Digital FT8

                    8 - Type on Value 1: FT8

                    9 - Change "Not Contains" to "Contains"

                    10 - Hit OK --> OK --> OK

                    Hope this will help others.

                    73
                    Eloy
                    CU3AK
                    Last edited by CU3AK; 01-23-19, 19:32.

                    Comment


                    • #11
                      Well done Eloy. Glad you solved it.
                      Icom ic-7610, SPE 1K-FA amp,Hex beam, Butternut HF6V and homebrew 40m/80m trap dipole.
                      PC - Windows 10.
                      Intel 4 Core i5-4460 CPU@3.2GHz, 8GB RAM,

                      Comment

                      Working...
                      X