Announcement

Collapse
No announcement yet.

States will not delete

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • States will not delete

    Hello

    HRD correct an issue with states and it now populates if the information is available . I Have the state colum and only to monitor US states and Candian provinces the rest I do not need / want.

    Now when info is available it populates for all countries BUT it cannot be removed / deleted through the view and or ALE etc this is so annoying.

    Is there a way around this or have I missed something ? It is poluting my logbook as far I what I need do with it

    Thanks
    Transcievers: Icom 7300 - USB (v1.2) - LP 100A
    Accessories : BY-1[Bencher] - KT-1 [Kent straight key]
    Antenna: Various dipoles

    PCIntel i3 3.3GHZ - 16GB Ram - Seagate expansion 1To external backup
    Canon Printer and QL700
    PC Software: Win 10 Pro X64 - MS Office. Avast. Meinberg NTP 4.2.8 . MariaDB.
    Radio Software : Win4Icomsuite 1.2.0.0 with HRD ver 6.4.907 Logbook - N1MM - MTTY - WSJT-X - v2.0.0 - JTAlert 2.12.7
    Memberships: REF - ARRL.
    DXCC : CW - RTTY
    WAS : Digital.

  • #2
    Try deleting the states and provinces from the LOCATION tab in ALE. That seem to be the only place where they are saved, so perhaps the only place they can be deleted at the current time till they fix LB.
    Last edited by WB5JJJ; 08-05-18, 14:06.
    --------------------------

    Windows 7 Pro (64bit) on a Dell 755 Duo with 4Gb RAM and 120Gb Kingston SSD
    2 - Dell 1708FB Digital HD Monitors (Rig Control on left and Logbook on right)
    Current version of HRD unless I see problems with it.

    ICOM IC-7410 to HRD via USB (on AS 6-Pack)
    ICOM IC-7000 to HRD via USB (currently mobile)
    ICOM IC-718 to HRD via Serial (on AS 6-Pack)
    ICOM IC-745 poor guy doesn't know what USB, HRD or CAT commands are (on a center-feed wire via LDG AT-11)

    Diamond X-50 at 35' for 2m & 70cm
    Mosley TA54-XLN-6 (7 elements) @ 30' for 20m thru 6m (WARC included)
    M2 6m5-HP @ 35' for 6m (+2 S-Units over Mosley and lower noise levels)
    Inverted "V" @ 30' for 40m & 20m
    Center-Feed Longwire for everything else
    Little Tarheel II Screwdriver for 80m thru 6m mobile using West Mountain TARGETuner

    LDG Electronics AT-11 Automatic Tuner (for IC-718)
    MFJ Electronics MFJ-901B Manual Tuner (for IC-745)

    Array Solutions 6-Pack Antenna switch (2 radio inputs & 6 antenna inputs)

    Yaseu D800SA Rotor controlled by HRD via an Easy Rotor Control (ERC) adapter card

    I upload to eQSL & HRDNet automatically in HRD. LoTW, ClubLog, QRZ.com DAILY and send my cards to the Bureau MONTHLY.
    Why doesn't everybody do this? It's so much easier than having to work through hundreds (or thousands) of log entries once or twice a YEAR.


    Licensed in April 1973.
    Retired July 2011.

    Comment


    • #3
      Good morning

      That did the trick I have made a note of it Thank you Jacques
      Transcievers: Icom 7300 - USB (v1.2) - LP 100A
      Accessories : BY-1[Bencher] - KT-1 [Kent straight key]
      Antenna: Various dipoles

      PCIntel i3 3.3GHZ - 16GB Ram - Seagate expansion 1To external backup
      Canon Printer and QL700
      PC Software: Win 10 Pro X64 - MS Office. Avast. Meinberg NTP 4.2.8 . MariaDB.
      Radio Software : Win4Icomsuite 1.2.0.0 with HRD ver 6.4.907 Logbook - N1MM - MTTY - WSJT-X - v2.0.0 - JTAlert 2.12.7
      Memberships: REF - ARRL.
      DXCC : CW - RTTY
      WAS : Digital.

      Comment

      Working...
      X