Announcement

Collapse
No announcement yet.

DM780 error at boot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DM780 error at boot

    Just starts getting this error with the last release. 6.4.0.840. Get this error at every startup of DM780.
    Can't seem to trase it down.

    73 de Tony, KD4K
    73 de Tony, KD4K
    May the force be with you.

    Rig = Kenwood TS-2000
    Digital Interface = microHAM micro KEYER 1
    Computer = Intel Core2 Quad CPU Q6600 @ 2.4GHz
    Memory = 8 GB
    Operating System = Windows 7 Ultimate 32 bit also Window 7 Ultimate 64 bit

  • #2
    Hi Tony. I'm getting the same error on start up of DM780. Mine is openCOMDevice(com5):access denied. Tried everything I know and no luck.

    Comment


    • #3
      OK, I found the problem. by accident, I was just clicking around and opened the Data Controller screen in DM780 and it was set to "auto connect" and I don't have a data controller connected to my setup at present. I cleared that "auto connect" checkbox and that cured the problem.
      73 de Tony, KD4K
      May the force be with you.

      Rig = Kenwood TS-2000
      Digital Interface = microHAM micro KEYER 1
      Computer = Intel Core2 Quad CPU Q6600 @ 2.4GHz
      Memory = 8 GB
      Operating System = Windows 7 Ultimate 32 bit also Window 7 Ultimate 64 bit

      Comment


      • #4
        Thanks for the helpful fix KD4K ! This has been bugging me for 2 years.

        Comment

        Working...
        X