No announcement yet.

Setting server level cluster filters

This topic is closed.
This is a sticky topic.
  • Filter
  • Time
  • Show
Clear All
new posts

  • cutter
    started a topic Setting server level cluster filters

    Setting server level cluster filters

    Hi All,

    Is it possible to get the cluster to only spot SSB,FM,AM modes and not CW or DIGI? I've nothing against them but don't use those modes. I suspect there's a way but not sure.


  • do4gr
    Looks pretty the same to me however, thanks for the link. As more information as better ...

    Leave a comment:

  • KG4GGG
    here in the command set for DX Spots. Its just a little different but process is similar

    Leave a comment:

  • n4kit
    Originally posted by do4gr View Post
    ... this should be pinned by the forum administrator in HRD LOGBOOK because it's asked many times. By the command reference of the given link you create your own filters.
    I agree with George, good tutorial Saki - consider it "stuck" :-)

    Leave a comment:

  • do4gr
    :-) Thanks a lot for the flowers WB5JJJ, I appreciate your comment. Hope this helps. All the best, 73

    Leave a comment:

  • WB5JJJ
    Thank you Saki (DO4GR).

    This is the best example of customizing the DX Cluster that I've seen from anybody, and from a new ham, at that. He's only been licensed less than a year and was able to put down an awesome, easy to read and understand explanation of its workings with images, highlights of the DX Cluster than anywhere else I've seen. Maybe HRD should hire this guy to do the documentation for their suite.


    Leave a comment:

  • do4gr
    Hi cutter,

    the explained solution by W3RJW will work of course. But this will castrate the bands within whole HRD Logbook software. I am not sure if this will restrict HRD Logbook in other functionalities. Me myself, I would go the other way for creating spot filters:

    ==> creating the desired filter in the DX cluster server. That is very easy and really powerful.

    You can set the desired filters in your DX cluster by sending commands to the DX cluster server. In the following I am referring to "DX Cluster". Please note that other cluster networks like ARC would use other command references, as already explained by W3RJW. You can send commands to the connected cluster server by the Console. You access the console window by clicking on the button [Show] like displayed on following screenshot: screenshot_dxcluster.jpg

    then click on [Console] screenshot_dxcluster_button.jpg

    and you will get a different view in the DX cluster window. Scroll down to the bottom of this view because new activity is shown on the bottom. On the upper right part you'll find a field called "Command" where you can enter commands that were explained in detail on the DX cluster command reference. screenshot_dxcluster_command_field.jpg

    You should read the link to DX cluster command reference that contains all available commands you can send to the DX cluster server. In your particular example you should concentrate on following commands

    With this command you set the desired filters for the spots you want to have displayed in HRD Logbook DX cluster window.


    I live in Germany and I want to have displayed only these spots that were spotted by ham radio operators living in Europe. I don't care about a spot like VP8SGI that were reported by US stations, because I potentially won't hear VP8SGI. I care only about the spots that were reported by Europe stations because they are geopgraphically located nearby me and the chance to hear the spotted station is much higher. As I have the "smalI" ham radio license here in Germany I am not allowed to operate on 40m, 20m, 17m and 12m. That's why I additionally want to skip all spots on these mentioned bands, too.

    For achieving that, my custom filter/command looks like that:
    accept/spots by_zone 14,15,16,20 and (on 10m or on 15m or on 80m or on 160m)

    What does that mean in detail? I get displayed only the spots reported by spotters residing in ITU zone 14,15,16 or 20 (that is mostly Europe) AND I want to get displayed them only when the spots are on the bands 10m, 15m, 80m or 160m.

    By that I get the DX cluster result as shown on the above screenshot. I get only the desired spots that suit my needs

    You can define even more filters and combine them if you like. For further instructions please read the link to the DX cluster command reference.
    • In your particular case where you just want to have displayed spots that operate on SSB only you should use following filter command:
      accept/spots on hf/ssb

    Some more commands you certainly will use for managing your filters.
    • To display the active/current filters:
    • To remove all filters:
      clear/spots all
    • To get more help about filtering with examples:
      help filter

    While using DX cluster commands for filtering you benefit from ...
    ==> The DX cluster server you are connecting to with your callsign will SAVE and thus REMEMBER your filter settings.
    So you only have to do this once and it is saved for ever until you change your filter or even delete it

    When finished creating your filter using the "Command" field, just click on [Show] --> [Spots] to get back to the usual DX spot view. screenshot_display_spots.jpg

    When finished please CLOSE the connection to the server (disconnect) by clicking the [Close] button on the left and then click again on this button called [Connect] for allowing the changes to take effect.

    In my humble opinion this should be pinned by the forum administrator in HRD LOGBOOK because it's asked many times. By the command reference of the given link you create your own filters.

    Hope this helps

    Good luck!
    vy 73's de DO4GR
    Last edited by do4gr; 02-04-16, 11:29.

    Leave a comment:

  • W3RJW

    There are two ways, but both rely on the band plan being used correctly ... First: you can construct reject filters in the console for each type of cluster- they are all different i.e. DXSpider, CC Cluster or ARC Cluster ...... remember the clusters have no requirement to spot "mode"(would be a nice feature), so a filter has to be done on frequency ..

    The easier way is to go to DX Cluster 'Options', 'Spot Filters' and set the F min and F max for just the Phone portion of each band ...

    for instance 20m you would set F Min to 14.150Mhz and so on for the other bands ...
    Last edited by W3RJW; 02-03-16, 12:52.

    Leave a comment: